Previous: Initial and boundary condition Up: Case structure Next: System files and case
This is an automatically generated documentation by LaTeX2HTML utility. In case of any issue, please, contact us at info@cfdsupport.com.
Physical setup and data for meshing
- trisurface – directory containing input geometry for snappyHexMesh utility.
- g – file containing definition of gravity acceleration .
- phaseProperties – this file defines:
- name of phases (water, particles).
- diameter model, particular diameter of particles and maximal volume fraction of particles in space.
- phase interaction models:
- blending – noBlending for cases where continuous phase is known.
- drag – caused by relative motion between phases.
- virtualMass – caused by relative acceleration between phases.
- heatTransfer – heat transfer between phases.
- lift – transverse force between continuous phase and particles.
- wallLubrication – near-wall behavior of continuous phase due to the surface tension effects.
- turbulentDispersion – continuous phase turbulence effects in dispersing particles.
- thermophysicalProperties.* – defines thermophysical properties of each phase using standard OpenFOAM thermophysical library.
- transportProperties – defines kinematic viscosity of Newtonian fluid.
- turbulenceProperties – defines type of turbulence modelling.
 constant |
|
|
trisurface |
|
|
Cyclone-inlet.stl |
<#37162#> |
|
Cyclone-outlet.stl |
|
|
Cyclone-wall.stl |
|
|
g |
- gravity acceleration |
|
phaseProperties |
- phaseProperties (euler) |
|
thermophysicalProperties.particles |
<#37170#> |
|
thermophysicalProperties.water |
|
|
transportProperties |
- transport properties (simple) |
|
turbulenceProperties |
- turbulence setup (simple) |
|
turbulenceProperties.particles |
<#37177#> |
|
turbulenceProperties.water |