Previous: Case structure Up: Case structure Next: Physical setup and data This is an automatically generated documentation by LaTeX2HTML utility. In case of any issue, please, contact us at info@cfdsupport.com. Initial and boundary condition The directory 0.org contains a definition of initial and boundary conditions for each variable.Table shows the list of all variables.Basic setup of initial and boundary condition:k.water – Initial and inlet value: uniform 0.375. nut.water – Set as calculated; At walls for continuous phase a standard wall function is applied.p – Static (kinematic) pressure value is set at the outlet.p – Static (kinematic) pressure value is set at the outlet. Table: Initial and boundary conditions for MPPICFoam. 0 k.water <#37313#> nut.water p - static pressure U.water - water velocity Previous: Case structure Up: Case structure Next: Physical setup and data OpenFOAM Training by CFD Support, CFD SUPPORT, info@cfdsupport.com +420 212 243 883 © CFD support, s.r.o., Sokolovská 270/201, 190 00 Praha 9, Czech Republic